Bridge Configuration Screen - Cabletron Systems SmartSwitch 8H02-16 User Manual

Chapter 6: Local Management
6.10

BRIDGE CONFIGURATION SCREEN

The Bridge Configuration screen, Figure 6-9, provides the basic setup
options to make a bridge operational in your network.
Access the Bridge Configuration screen from the Device Configuration
menu by using the arrow keys to highlight the Bridge Configuration
option and pressing ENTER. The Bridge Configuration screen,
Figure 6-9, appears.
Event Message Line
Device Name: 8H02-16
Bridge Address: 00-00-1D-00-00-00
Number of Ports:
Port #
1
2
3
4
5
6
7
8
SAVE
The following describe each field of the Bridge Configuration screen:
Bridge Address (Read-Only)
Displays the MAC address of the bridge.
Number of Ports (Read-Only)
Displays the total number of bridged ports on the 8H02-16.
6-28
8H02-16 LOCAL MANAGEMENT
Bridge Configuration
16
MAC Address
00-00-1D-00-00-00
00-00-1D-00-00-01
00-00-1D-00-00-02
00-00-1D-00-00-03
00-00-1D-00-00-04
00-00-1D-00-00-05
00-00-1D-00-00-06
00-00-1D-00-00-07
Figure 6-9 Bridge Configuration Screen
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Type of STA: [DEC]
State Status
learning [ENABLED]
listening [DISABLED]
standby [ENABLED]
learning [DISABLED]
listening [ENABLED]
standby [DISABLED]
listening [ENABLED]
listening [DISABLED]
[9-16]
8H02-16 User's Guide
XX.XX.XX
RETURN
174218