idp SMART Series User Manual page 63


Rotate
Rotator is to flip over a card in the printer installed flipper. "Auto" is to move a card
from printer to flipper and flip over a card and move a card to the printing position
automatically. "Batch" is to repeat "Auto" as many times as the number of set. "To
Bottom" is to turn to the backside of card and "To Top" is to turn to the front side of
card.

Etc
"Cleaning Roller" is to clean the roller by cleaning card automatically. "Use Log" is to
display log in message space.
(3) Print
Print can be done through the CSD file which is designed by Smart Design program.
Following the steps in this section.
1. Click "..." button and select the CSD file.
2. Click "Open" button to prepare CSD file to print.
Click "Print" Button to move print data to spool. In the NORMAL mode, Click "Print"
3.
button to print a card, but in the SBS mode, "Print" button to transmit a printing data
from PC to printer and wait for printing. Therefore, you must click "DoPrint" to print in
SBS mode. This function is for detail control of printer.
4. Click "Close" button to close CSD file.
(4) Batch
Batch is to repeat encoding/decoding test continuously. In the Repeat, you input the number of
repeat and click "Batch Start", then the test is run as many times as the number of set. When
you check "Include Card In/Out", each time the printer bring a card from input hopper and
perform an encoding test and eject the card. But if not, encoding test will be done only by one
card. At that time, if there is no card in the printer, the printer bring a card into the printer from
input hopper and repeat the encoding test on the card, and if there is a card in the printer, the
encoding test is performed on the card repeatedly. "Card Holding" is activated when "Include
Card In/Out" is ticked. When "Card Holding" is ticked and the repeat number is set, the printer
repeats the encoding test as many times as the number of set in the "Card Holding" without
ejection. When it is completed, the printer ejects the card and brings a new card into the printer
and starts testing.
63