idp SMART Series User Manual page 36

 Card Side [Front/Back]: to set the direction of card when waiting
 Wait Position [-100:100]: to set the position of card to wait from the
criteria position. Unit is 0.1mm
 Wait Time [0:1000]: to set time to wait. Unit is second
- Wait at External Module Contactless Encoding Position [On/Off]: to set
whether to wait at the External RF encoder or not
 Card Side [Front/Back]: to set the direction of card when waiting
 Wait Position [-100:100]: to set the position of card to wait from the
criteria position. Unit is 0.1mm
 Wait Time [0:1000]: to set time to wait. Unit is second
- Wait at Internal Module Contact Encoding Position [On/Off]: to set whether to
wait at the Internal IC encoder or not
 Card Side [Front/Back]: to set the direction of card when waiting
 Wait Position [-100:100]: to set the position of card to wait from the
criteria position. Unit is 0.1mm

Wait Time [0:1000]: to set time to wait. Unit is second
36