Service
(continued)
User Interface Display Identification
Operation Display
24
Undercounter Dispenser and Ice machine 7UC100A/7UD100A
––––––––––––––––––––––––––––––––––––––––––––––––––––
PM
Condition
Normal
operation
Cleaning
Press and release maintenance/clean switch to
Mode
clean the user interface without dispensing ice
or water (see
page
9).
Drip tray full
Empty drip tray .
Six-month
Follow Maintenance Mode procedure (below)
periodic
and also see
11.
maintenance
required
Maintenance
Enter Maintenance Mode by pressing
Mode
maintenance/clean switch until
Complete the cleaning and sanitizing procedure
shown on
equipped . Exit Maintenance Mode by pressing
and holding maintenance/clean switch until
no longer displays .
Service - 8000
Call Follett Technical Service Group at (877)
hr bushing
612-5086 or +1 (610) 252-7301 . The flashing
check
wrench indicates that the 8000 hr bushing check
is required .
High amps
Contact Follett technical service group at (877)
612-5086 or +1 (610) 252-7301 .
Note: For dispensers after serial number
D45191, the phone and wrench will not be
illuminated .
Internal leak in
Locate leak and repair - Press reset on control
dispenser
board . Contact Follett if ice machine is leaking .
Sleep mode
Press either dispense button to return to normal
operation .
Procedure
—
Maintenance/Cleaning Mode on
Cleaning and Sanitizing on page
page 11
and change the filter, if so
displays .