Table of Contents
Advertisement
Filter Display Indicator Activation –––––––––––––––––––––––––––––––––––––
If you purchased your dispenser with a Follett filter, the filter display indicator
activation has been preset at the factory .
If you are using an "after market filter," an adjustment may be made to
activate the "Fresh Filtered Ice & Water" display .
Activating "Fresh Filtered Ice & Water"
1 . Remove the front panel as explained in
Components on page 9
2 . Remove top panel (Fig . 7 .1) .
3 . Remove (1) screw and top of control board enclosure (Fig . 7 .2) .
4 . Locate the DIP switches on the dispenser's control board (Fig . 8) .
Use a fine-pointed object to move the "Filter" DIP switch (DIP switch
#3) to the ON position .
Deactivating the Six-Month Maintenance/Filter Change Reminder
1 . Use a fine-pointed object to move the "PM" DIP switch (DIP switch
#8) to the ON position .
OFF
Not used (OFF position)
Ice only
No internal filter
Not used (OFF position)
Not used (OFF position)
15 minute delay
Not used (OFF position)
Six-month PM enabled
10
Undercounter Dispenser and Ice machine 7UC100A/7UD100A
Accessing Internal
then refer to Fig . 7 .
ON
Ice & water
Internal filter supplied or to display "Fresh Filtered"
30 minute delay
Six-month PM disabled
Fig . 7
1
2
Fig . 8
Advertisement
Table of Contents
