Table of Contents
Advertisement
Service
(continued)
7 .
Install compression nozzle:
§ Remove and inspect compression nozzle O-ring seal .
Replace if damaged in any way .
§ Clean O-ring groove . Lubricate O-ring with Petro-gel and
reinstall .
§ Install compression nozzle (Fig . 21 .1) .
§ Install compression nozzle retainer (Fig . 21 .2) .
§ Install M6 socket head allen screw (Fig . 21 .3) .
8 . Install transport tube (Fig . 22 .1) .
9 . Tighten hose clamp (Fig . 22 .2) .
10 . Install gear motor:
§ Install main housing insulation (Fig . 23 .1) .
§ Slide gear motor onto auger shaft (Fig . 23 .2) .
§ Install two M6x90 allen screws (Fig . 23 .3) .
–––––––––––––––––––––––––––––––––––––––––––––––––––
Undercounter Dispenser and Ice machine 7UC100A/7UD100A
Fig . 21
3
2
Fig . 22
1
Fig . 23
3
2
3
1
2
1
17
Advertisement
Table of Contents
