Ip Commands - Atlona JunoX AT-JUNO-451 User Manual

IP Commands

Command
IPCFG
IPQuit
IPAddUser X Y
e.g. IPAddUser Atlona 1234
IPDelUser X
IPDHCP X
IPStatic X Y Z
e.g. IPStatic 192.168.1.1
255.255.255.0 192.168.1.200
IPPort X
IPLogin X
e.g. IPLogin off
Broadcast X
e.g. Broadcast on
IPTimeout XX
e.g. IPTimeout 300
UartPara W,X,Y,Z
e.g. UartPara 115200,8,0,1
UartPara sta
RAtlMac
Each command or feedback is terminated with a carriage return.
Note: If the command fails or is incorrect the feedback is "Command FAILED"
atlona.com
Feedback
IP Addr : x.x.x.x
Netmask : x.x.x.x
Gateway : x.x.x.x
IP Port : x
IPQuit
TCP/IP user was added
TCP/IP user was deleted
IPDHCP X
IPStatic X Y Z
e.g. IPStatic 192.168.1.1
255.255.255.0 192.168.1.200
IPPort X
IPLogin X
e.g. IPLogin off
Broadcast X
e.g. Broadcast on
IPTimeout XX
e.g. IPTimeout300
UartPara W,X,Y,Z
e.g. UartPara 115200,8,0,1
UartPara W,X,Y,Z
xx-xx-xx-xx-xx-xx
Description
Displays IP address configuration
Logs out of TCP/IP Connection
Adds a user for TCP/IP control
X= user and Y= Password
Delete a user from TCP/IP X= username
Turns DHCP on or off X= on, off, sta
Sets static IP address
IPStatic Address(X) Netmask(Y) Gateway(Z)
Set the TCP/IP Port
Enables IP Login
X= on, off, sta
Sets broadcast mode on or off
X= on, off, sta
Determines amount of seconds of inactivity before TCP/
IP disconnects
Set UART parameters
W=baud rate X=data length Y=parity Z=stop-bit
e.g. Set the parameters to 115200, 8, 0, 1
Displays UART parameters
Displays the MAC address of the unit
12
Toll free: 1-877-536-3976
Local: 1-408-962-0515