Table of Contents
Advertisement
Command
SetCmd x[y]
e.g. SetCmd on[PWR ON]
SetEnd x[y]
e.g. SetEnd off[CR-LF]
TrigCEC y
e.g. TrigCEC on
TrigRS y
e.g. TrigRS vol+
TrigIP y
e.g. TrigIP vol-
CtlType x
e.g. CtlType rs-232
CliMode x
e.g. CliMode non-login
CliUser x
e.g. CliUser
CliPass x
e.g. CliPass AtlonA
CliIPAddr x
e.g. CliIPAddr sta
CliPort x
e.g. CliPort 24
IP Commands
Command
IPCFG
IPQuit
IPAddUser X Y
E.g. IPAddUser Atlona 1234
IPAddUser
IPDelUser X
IPDHCP X
IPStatic X Y Z
E.g. IPStatic 192.168.1.1
255.255.255.0
192.168.1.200
IPPort X
IPLogin X
E.g. IPLogin off
Broadcast X
E.g. Broadcast on
IPTimeout XX
E.g. IPTimeout 300
Each command or feedback is terminated with a carriage return.
Note: If the command fails or is incorrect the feedback is "Command FAILED"
atlona.com
Feedback
SetCmd x[y]
e.g. SetCmd on[PWR ON]
SetEnd x[y]
e.g. SetEnd off[CR-LF]
TrigCEC y
e.g. TrigCEC on
TrigRS y
e.g. TrigRS vol+
TrigIP y
e.g. TrigIP vol-
CtlType x
e.g. CtlType rs-232
CliMode x
e.g. CliMode non-login
CliUser x
e.g. CliUser admin
CliPass x
e.g. CliPass AtlonA
CliIPAddr x
e.g. CliIPAddr 192.168.0.23
CliPort x
e.g. CliPort 24
Feedback
IP Addr : x.x.x.x
Netmask : x.x.x.x
Gateway : x.x.x.x
IP Port
: x
IPQuit
TCP/IP user was added
username password
username password
username password
TCP/IP user was deleted
IPDHCP X
IPStatic X Y Z
E.g. IPStatic 192.168.1.1
255.255.255.0
192.168.1.200
IPPort X
IPLogin X
E.g. IPLogin off
Broadcast X
E.g. Broadcast on
IPTimeout XX
E.g. IPTimeout300
Description
Sets the RS-232 or IP command for the selected button or
function
x = on, off, vol+, vol-, and mute y = command
e.g. Set the on command to send the command PWR ON
Sets the line termination for the chosen command
x = on, off, vol+, vol-, mute, fbkon, fbkoff, fbkmute
y = None, CR, LF, CR-LF, Space, STX, ETX, and null
e.g. Set the command off to have a carriage return and line feed
Triggers the stored CEC command to turn the display on
and off
y = on, off
Triggers the RS-232 command from RS-232 or IP
y = on, off, vol+, vol-, and mute
Triggers the IP command from RS-232 or IP
y = on, off, vol+, vol-, and mute
Sets the control type
x = ip, rs-232, cec
e.g. Set the control type to RS-232
Sets the control device's IP mode
e.g. Sets the IP mode to non-login
Sets the IP username for login
e.g. Display the IP username by leaving x blank
Sets the IP password for login
e.g. Set the IP password to AtlonaA
Sets the IP address of the controlled device
e.g. Display the IP address of the controlled device
Sets the IP port of the controlled device
e.g. Set the IP port to 24
Description
Displays IP address configuration
Logs out of TCP/IP Connection
Adds a user for TCP/IP control
X= user and Y= Password
Displays a list of users and passwords
Delete a user from TCP/IP X= username
Turns DHCP on or off X= on, off, sta
Sets static IP address
IPStatic Address(X) Netmask(Y) Gateway(Z)
Set the TCP/IP Port
Enables IP Login
X= on, off, sta
Sets broadcast mode on or off
X= on, off, sta
Determines amount of seconds of inactivity before TCP/IP
disconnects
19
x = sta, login, non-login
x = username, (blank)
x = password, (blank)
x = ip, sta
x = port, sta
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Advertisement
Table of Contents
