Create A Batch Command; Create A Batch Barcode - Newland NLS-BS30 User Manual

Create a Batch Command

A batch command may contain a number of individual commands each of which is terminated by a semicolon (;).
For more information, refer to the "Use of Programming Command" section in Chapter 3.

Create a Batch Barcode

Batch barcodes can be produced in the format of PDF417, QR Code or Data Matrix.
Example: Create a batch barcode for Normal Illumination, Sense Mode, Decode Session Timeout = 2s, Disable
Interleaved 2 of 5:
1. Input the following commands:
@ILLSCN1;SCNMOD2;ORTSET2000;I25ENA0;
2. Generate a PDF417 batch barcode.
259
Enter Setup
** Exit Setup