Table of Contents
Advertisement
7C0x SmartSwitch
MIB Structure
7C0x SmartSwitch management information base configuration
IETF MIB Support
In addition to its proprietary features, the 7C0x SmartSwitch currently supports
the following IETF MIBs:
•
•
•
•
7C0x SmartSwitch MIB Structure
Cabletron's newer intelligent devices — like the 7C0x SmartSwitch — organize
MIB data into a series of "components." A MIB component is a logical grouping of
MIB data, and each group controls a defined set of objects. For example, 7C0x
bridging information is organized into its own component, and SecureFast
switching resides in a separate component; RMON functionality is contained
within its own component; and an ATM component will be instantiated whenever
a 7A06-01 NIM is installed in the SmartSwitch chassis.
The 7C0x SmartSwitch MIB consists of up to nine components, each of which is
described below. Note, however, that at any given time, the MIB component list
displayed by your 7C0x may not include some of the components described
below, since the SmartSwitch has the ability to alter the components which make
up its MIB in response to changes in the chassis. For example, if no FDDI or ATM
NIMs are installed, the related MIB components will not appear in the list;
similarly, either the bridge or the switch component will be instantiated,
RFC 1213 MIB for Network Management of TCP/IP-based Internets: MIB-II
RFC 1493 Definitions of Managed Objects for Bridges
RFC 1512 FDDI Management Information Base
RFC 1757 Remote Network Monitoring MIB
Appendix A
A-1
Advertisement
Table of Contents
