Cabletron Systems 7C03 User Manual page 107

MAC Address
The factory-set MAC hardware address assigned to me 7X00 Controller module's
backplane (or Host) interfaces. (Note that these two internal interfaces share a
MAC address.)
Clicking on the Device button displays the Device menu. The Device menu lets
you perform the following:
•
•
•
•
•
•
•
If you need to call Cabletron's Technical Support about a problem with the Bridge
View, you'll need the information provided in the Information window:
Clicking mouse button 1 on the Bridge Traffic View Quit button closes all Bridge
View windows.
Accessing the Bridge Traffic View Window
Open the Bridge Status window
Display a summary of bridge statistics
Open the Filtering Database window
Open the Find MAC Address window
Open the Special Database window
Open the Spanning Tree Protocol window
Open the Polling Intervals window
Figure 6-2. Bridge Information Window
Using the 7C0x SmartSwitch Bridge View
Bridge firmware
revision
SPMA Bridge
View version
6-5