Table of Contents
Advertisement
To save log files:
1. Click on the Save button and select either Current Log or All Logs to open
2. In the Save Log window, enter a file name for the file to be saved and then
To disable the Forwarding Log of all bridge ports or individual bridge ports:
1. Click button 3 on the appropriate Bridge Port box to display the Port menu.
2. In the Port menu, click button 3 on Forwarding Thresholds and then drag
3. In the Forwarding Thresholds window, deselect the Log Changes in State
4. Click on the Apply button and then click on either Selected Only or All.
Changing Polling Intervals
Much of the information displayed in the Bridge Traffic View is gathered
periodically rather than continuously. You can edit the times between these
periodic polls.
To edit the polling times:
1. Display the Device menu by clicking on the Front Panel
2. Drag down to Polling Intervals and release. The Polling Intervals window
3. Highlight and edit the Device Info and Bridge Port Display Info boxes and
Changing Polling Intervals
the Save Log window.
click on the OK button. The default directory for saved log files is the current
directory. To specify a different directory, include the path name with the log
file name.
right to Transparent.
box.
displays.
Figure 6-17. The Polling Intervals Window
then click on the Apply button to save changes.
Using the 7C0x SmartSwitch Bridge View
button.
6-35
Advertisement
Table of Contents
