System Memory; System Memory Guidelines - Dell EMC PowerEdge T150 Installation And Service Manual

Figure 27. Installing the optical drive
Next steps
1. Connect the power cable and the data cable to the optical drive.
NOTE: Route the cables properly to prevent them from being pinched or crimped.
2. Install the front bezel.
3. Follow the procedure that is listed in

System memory

System memory guidelines

The PowerEdge T150 system supports DDR4 unregistered DIMMs (UDIMMs). System memory holds the instructions that are
executed by the processor.
Your system contains four memory sockets that are organized into two channels. In each channel, the first socket is marked
white and the second socket black.
After working inside your system.
Installing and removing system components 39