Figure 26. Removing the optical drive
Next steps
Replace the optical drive
Installing the optical drive
Prerequisites
NOTE:
Only slim 9.5 mm SATA DVD-ROM drive or DVD+/-RW drive can be installed in your system. External optical drives
can be connected through USB ports.
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3.
Remove the front
bezel.
Steps
1. Align the optical drive with the slot in the optical drive cage.
2. Slide the optical drive into the slot until the release tab snaps in place.
38
Installing and removing system components
or
install the optical drive
Safety
instructions.
Before working inside your
fillers.
system.
Need help?
Do you have a question about the EMC PowerEdge T150 and is the answer not in the manual?