Table of Contents
Advertisement
Figure 24. Installing the optical drive filler into the front bezel
2. On the optical drive cage, hold the tabs on the optical drive filler and push the filler into the optical drive cage.
Figure 25. Installing the optical drive filler into the optical drive cage
Next steps
1.
Install the front
bezel.
2. Follow the procedure that is listed in
Removing the optical drive
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3.
Remove the front
bezel.
4. Disconnect the power and data cables from the back of the optical drive.
NOTE:
Ensure that you note the routing of the power and data cable on the side of the system as you remove them
from the system board and drive.
Steps
Press the release tab and slide the optical drive toward the front of the system.
After working inside your
Safety
instructions.
Before working inside your
system.
system.
Installing and removing system components
37
Advertisement
Table of Contents
