Removing A 3.5-Inch Drive Adapter From A 3.5-Inch Drive Carrier - Dell EMC PowerEdge T150 Installation And Service Manual

Figure 17. Installing a 2.5-inch drive into the 3.5-inch drive adapter
Next steps
1. Install a 3.5-inch adapter into the 3.5-inch drive
2. Follow the procedure listed in

Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the 3.5-inch drive carrier from the
Steps
Flex the drive bracket and remove the adapter from the carrier.
Figure 18. Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier
32 Installing and removing system components
carrier.
After working inside your
Safety instructions.
Before working inside your
system.
system.
system.