Table of Contents
Advertisement
Figure 27. Installing the optical drive
Next steps
1. Connect the power cable and the data cable to the optical drive.
NOTE:
Route the cables properly to prevent them from being pinched or crimped.
2.
Install the front
bezel.
3. Follow the procedure that is listed in
System memory
System memory guidelines
The PowerEdge T150 system supports DDR4 unregistered DIMMs (UDIMMs). System memory holds the instructions that are
executed by the processor.
Your system contains four memory sockets that are organized into two channels. In each channel, the first socket is marked
white and the second socket black.
After working inside your
system.
Installing and removing system components
39
Advertisement
Table of Contents
