Installing A Drive Into The Drive Carrier - Dell EMC PowerEdge T150 Installation And Service Manual

Figure 14. Removing the drive from the drive carrier
Next steps
Install the drive into the drive carrier.

Installing a drive into the drive carrier

Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure that is listed in Before working inside your system.
3. Remove a 3.5-inch drive carrier from the drive bay.
Steps
1. Align the screw holes on one side of the drive with the pins on the drive carrier.
2. Flex the side of the drive carrier, and place the drive into the drive carrier.
Installing and removing system components 29