Frontbezel; Removing The Front Bezel - Dell EMC PowerEdge T150 Installation And Service Manual

Figure 9. Installing the system cover
Next steps
1. Place the system upright on a flat, stable surface.
2. Reconnect the peripherals and connect the system to the electrical outlet, and then power on the system.

Frontbezel

Removing the front bezel

Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
Steps
1. Lift the retention clips at the edge of the bezel.
2. Unhook the bezel tabs and remove the bezel.
24 Installing and removing system components