Interface Device Icon - Cabletron Systems 3Com PortSwitch Hub Manual

Interface Device View

Interface Device Icon

Interface Device Icon
This icon is a logical representation of the services provided by this device.
This section describes the information available from the Interface Device
icon.
PortSwitch Hubs.
The callouts displayed in this illustration identify the label name and, when
available, the view to which it provides double-click access. For example:
NOTES
Interface Status Label/Interface Status View displays the operating status of
the interface and provides double-click access to the Interface Status view.
The menus displayed in the illustration are the Icon Subviews menus for
that label.
Figure 2-5. Interface Device Icon
Close
Navigate
Alarms
Performance
Notes...
Utilities
Detail
IF Status
IF Configuration
IF Address Translation Table
Secondary Address Panel
Thresholds
Model Information
Interface Index Number
Displays the number used to refer to this interface.
Interface Status Label
Displays the operational status of this interface. Double-click this area to open
the Interface Status view. Possible values are Default, ON, OFF, and Testing.
Interface Type Label
Displays the protocol in use on this interface. Double-click this area to open
the
Device Views
2-8
Figure 2-5 shows an example of the Interface Device icon for 3Com
Interface Index Number
Alt+F4
10494
0:0:0:0:0:0
Interface Configuration View
Interface Status Label/
Interface Status View
ON
Ethernet
0.0.0.0
0
Interface
Device
Icon
described in Chapter 3,
Interface Type Label/
Interface Configuration View
MAC (Physical) Address Label/
Interface Address Translation Table
IP Address Label/
Secondary Address Panel
Interface Performance Label/
Interface Performance View
Configuration
3Com PortSwitch Hubs
Management Module Guide
Views.