Cabletron Systems 3Com PortSwitch Hub Manual page 42

Table 4-1. 3Com PortSwitch Hubs Events and Alarms (Continued)
CsEvFormat/Event00ea0048
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that either
the main and backup rings have
wrapped or that the wrap condition has
been removed. The new wrap state is {I
1} (1=NotWrapped, 2=Wrapped). (event
[{e}])
CsEvFormat/Event00ea0049
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that a MAU
port {I 2} has had a change in attach
state and the admin state of the port is
disabled. The new attach state is {I 1}
(1=Absent, 2=Present). (event [{e}])
CsEvFormat/Event00ea0050
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that the
Ring In port has changed state while
the mode is fail-safe. The new Ring In
state is {I 1} (1=Open, 2=Wrap). (event
[{e}])
CsEvFormat/Event00ea0051
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that the
Ring Out port has changed state while
the mode is fail-safe. The new Ring Out
state is {I 1} (1=Open, 2=Wrap). (event
[{e}])
CsEvFormat/Event00ea0060
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that a MAU
port {I 2} has changed state due to
operation of ZDL or DRI. The new MAU
port state is {I 1} (1=Enabled,
2=Disabled). If disabled the reason is {I
3} (1=None, 2=Mgmt, 3=ZDL, 4=DRI).
(event [{e}])
9032295 E2
Message in the Event Log
Device Events and Alarms
Alarm View Probable Cause
Message
No Probable cause message.
No Probable cause message.
No Probable cause message.
No Probable cause message.
No Probable cause message.
Event and Alarm Messages
4-9