Table of Contents
Advertisement
Device Events and Alarms
Table 4-1.
3Com PortSwitch Hubs Events and Alarms (Continued)
CsEvFormat/Event00ea0043
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that a port
{I 2} in a resilience pair has had a
change in state and the active port has
been switched. The state of the main
port is {I 1} the state of the backup port
is {I 3} (1=Failed, 2=OK, 3=OK-And-
Active) (event [{e}])
CsEvFormat/Event00ea0044
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that a port
{I 2} in a resilience pair has had a
change in state and the active port has
not been switched. The state of the
main port is {I 1} the state of the backup
port is {I 3} (1=Failed, 2=OK, 3=OK-
And-Active) (event [{e}])
CsEvFormat/Event00ea0045
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that a
topology change has ocuured in the ring
at time {I 1}. (event [{e}])
CsEvFormat/Event00ea0046
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that the
main rings state has changed to {T
rstate 1}. (event [{e}])
CsEvFormat/Event00ea0047
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that the
backup rings state has changed to {T
rstate 1}. (event [{e}])
Event and Alarm Messages
4-8
Message in the Event Log
Alarm View Probable Cause
Message
No Probable cause message.
No Probable cause message.
No Probable cause message.
No Probable cause message.
No Probable cause message.
3Com PortSwitch Hubs
Management Module Guide
Advertisement
Table of Contents
