Table 4-1.
3Com PortSwitch Hubs Events and Alarms (Continued)
CsEvFormat/Event00ea0020
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports the
endstation table is full. (event [{e}])
CsEvFormat/Event00ea0025
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that the
slot. port. index {I 2} mau has entered or
left the available state. current state is
{T maustate 1}. (event [{e}])
CsEvFormat/Event00ea0027
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that a new
entity of service type {T service 1} has
been installed at location {I 2}. The
service ID is {I 5} and the entity has
name {S 9} and {I 7} ports. (event [{e}])
CsEvFormat/Event00ea0028
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that an
entity of service ID {I 1} and entity
name {S 3} has been removed. (event
[{e}])
CsEvFormat/Event00ea0029
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that an
entity of service ID {I 1} at the slot.
index is {I 4} has changed its facilitities
for its type {T etype 3} to {I 5}. (event
[{e}])
CsEvFormat/Event00ea0030
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that a card
is added to the service {I 1}. (event [{e}])
9032295 E2
Message in the Event Log
Device Events and Alarms
Alarm View Probable Cause
Message
CsPCause/Prob00ea0020
When the end-station table becomes full
this trap is generated.
No Probable cause message.
No Probable cause message.
No Probable cause message.
No Probable cause message.
No Probable cause message.
Event and Alarm Messages
4-5
Need help?
Do you have a question about the 3Com PortSwitch Hub and is the answer not in the manual?
Questions and answers