Table of Contents
Advertisement
Serial I/f Application
Interface Extensions Application
Speed
Displays the receive and transmit speed of the port if AutoConfig is disabled.
Different speeds for transmit and receive are not possible.
Char Size
Displays the character size if AutoConfig is disabled. Possible values are size7
and size8.
Stop Bits
Displays the number of stop bits, either 1, 1.5, or 2, if AutoConfig is disabled.
Parity
Displays the parity option to use if AutoConfig is disabled.
DSR Cont
This field only applies to Local connection types. It displays whether DSR
needs to be asserted for a local connection to be made and if the connection
needs to be released if the DSR is seen deasserted.
DCD Cont
This field only applies to Local connection types. It displays whether DCD
needs to be asserted for a local connection to be made and if the connection
needs to be released if the DCD is seen deasserted.
Flow Cont
Displays the flow control protocol to be used.
Update
Set this field to Change using the V.24 Configuration Table Entry view to force
the port to update its parameters.
Interface Extensions Application
This application provides the Interface Extensions view. The model type for
this application is 3ComExtIfApp.
Interface Extensions View
This view contains the Interface Extensions Table. Double-click an entry to
access the RFC1516 Extension Entry view, which allows you to modify an
interface.
If
Displays the interface number.
Enable Bootp
Displays whether BootP is enabled or not.
Application Views
5-22
3Com PortSwitch Hubs
Management Module Guide
Advertisement
Table of Contents
