Cabletron Systems 3Com PortSwitch Hub Manual page 39

Device Events and Alarms
Table 4-1. 3Com PortSwitch Hubs Events and Alarms (Continued)
CsEvFormat/Event00ea0031
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that a card
has been removed from the service {I 1}.
(event [{e}])
CsEvFormat/Event00ea0032
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that a
physical entity of service id {I 1} has
changed state to {T estate 3}. (event
[{e}])
CsEvFormat/Event00ea0033
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that the
power requirements of the entities in
the chassis exceed the power capacity of
the power supplies. (event [{e}])
CsEvFormat/Event00ea0034
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that the
managemant card temperature sensing
device is reporting DANGER. (event
[{e}])
CsEvFormat/Event00ea0035
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that the
status input {I 2} of name {S 3} has
changed state to {I 1} (1=Open,
2=Closed). (event [{e}])
CsEvFormat/Event00ea0036
{d "%w- %d %m-, %Y - %T"} A 3Com
Hub, {t} (name {m}) reports that port {I
2} has learned a staion address {H 3}.
(event [{e}])
Event and Alarm Messages
4-6
Message in the Event Log Alarm View Probable Cause
Message
No Probable cause message.
No Probable cause message.
CsPCause/Prob00ea0033
The combination of the power requirements
of all the entities in the chassis has been
calculated to exceed the power capacity of
the power supplies present in the chassis.
CsPCause/Prob00ea0034
Mounted on the Management card is a
temperature sensing device. This device
provides three output levels: OK, WARM
and DANGER. DANGER causes a trap to
be generated.
No Probable cause message.
No Probable cause message.
3Com PortSwitch Hubs
Management Module Guide