Figure 1-1. Using Double-Click Zones To Access Spectrum Views; Accessing Spectrum Views; Chapter 5 Application Views - Cabletron Systems 3Com PortSwitch Hub Manual

Accessing SPECTRUM Views

Accessing SPECTRUM Views
Icons and labels that display information within an icon provide access to
SPECTRUM views. This is done using double-click zones
Subviews menu selections
To access the Icon Subviews menu as shown in
the following:
1. Highlight the icon or label.
2. From the View menu select Icon Subviews or click the applicable mouse
Figure 1-1. Using Double-Click Zones to Access SPECTRUM Views
Accesses the Device Topology view;
refer to the SPECTRUM Views
Reference.
Accesses the Performance view;
refer to the SPECTRUM Views
Reference.
Accesses the Device views;
see Chapter 2, Device
Accesses the Device Topology view;
refer to the SPECTRUM Views
Reference.
Introduction
1-2
button (middle or right). Refer to the SPECTRUM Icons Reference for
information on configuring your mouse.
Accesses the Configuration views;
see Chapter 3,
Model Name
Hub3ComPortSw
Accesses the Configuration views;
see Chapter 3, Configuration
Model Name
Views.
Hub3ComPortSw
(Figure 1-2).
Configuration Views.
Accesses the Device views;
see Chapter 2,
Accesses the Application views;
see Chapter 5,
Views.
Accesses the Performance view;
refer to the SPECTRUM Views
Reference.
Accesses the Application view;
see Chapter 5,
(Figure 1-1) and Icon
Figure 1-2 and Figure
Device Views.
Application Views.
Application Views.
3Com PortSwitch Hubs
Management Module Guide
1-3, do