Securam ScanLogic D66 Operation Manual page 6

codes (612345), LCD screen will show : "Code is similar" and the code will not be accepted.
Enter a different code for this User.
5.0 Enable User Code (Security Level 3)
Step 1: Press "Menu/OK". The screen will show "Select Menu".
Step 2: Press "▲" or "▼" to select "System Menu". Press "Menu/OK" again.
Step 3: Place an enrolled administrator's finger (ID No. 01 or 02) on the scanner and hold.
Step 4: After the fingerprint is verified successfully, press "▲" or "▼" to select "Enable User
Code", press "Menu/Ok".
Step 5: The screen will display "ID:03 Code Enable?", press "▲" or "▼" to select the desired ID
No. to be enabled.
Step 6: When the desired ID No. is visible on the screen, press "Menu/Ok" to select.
This User ID will now have the ability to have a code in addition to an enrolled fingerprint.
Important: The User must now set his own code using his enrolled fingerprint.
Step 7: Press "Menu/Ok", press "▲" or "▼" to select "System Menu". Enter the System Menu
with the User's fingerprint (in this example using the fingerprint of ID No.3).
Step 8: Press "▲" or "▼" to select "Set/Change User Code".
Step 9: Enter a unique 6 digit code.
Step 10: Enter the same 6 digit code.
When the LCD screen displays: "ID:03 Code Saved", the code of ID:03 has been set successfully .
Note:
If consecutive four digits of a new code (for example 512341) is the same as one of the enrolled
codes (612345), LCD screen will show: "Code is similar" and the code will not be accepted. Enter
a different code for this User.
6.0 Disable User Code (Security Level 3)
If a User has previously had a code enabled for use, this function will Disable the code.
Step 1: Press "Menu/OK". The screen will show "Select Menu".
Step 2: Press "▲" or "▼" to select "System Menu". Press "Menu/OK" again.
Step 3: Place an enrolled administrator's finger (ID No. 01 or 02) on the scanner and hold.
Step 4: After the fingerprint is verified successfully, press "▲" or "▼" to select "Disable User
Code", press "Menu/Ok".
SECURAM Systems Inc. ScanLogic D66 Operation Guide Page 6