Quick Start Guide – ScanLogic D Series
Congratulations on the purchase of your new SECURAM ScanLogic D Series Lock! This Quick Start guide will help
you set up your biometric safe lock for use. Note: All programming must be completed with the safe door open.
The safe lock system is powered by (1) 9V alkaline battery. Duracell or Energizer brands are recommended.
Once the 9V battery is in stalled, the ScanLogic D Series
is ready to enroll its first fingerp rint. To a ctivate the
enrollment p rocess, place your finger on the reader.
The LED display will illuminate with this message:
The Time and Date will appear on the screen.
•
Verify if the Time and Date is correct.
•
Each of the elements of th e date and time will flash
•
when it is available to be set. Use the"▲ " or "▼" to
scroll to the correct value and Press OK to move to
the next element.
Place your finger on the optical reader and hold.
•
Hold your finger on the reader until the messages
•
above appear. Your fingerprint is read, check ed and
enrolled.
Note: This 1st fingerprint is the Ad ministrato r's
•
fingerp rint and will be used to manage the
programming of this system
To Open Lock with your Fingerprint
Place your finger on the optical reader.
•
Your fingerp rint will be read, verified and the lock
•
will open. That's it!
Set a User Code for the Enrolled Admin (ID 01-02)
Press "Menu/OK". The screen will show "S elect
•
Menu".
Press "▼" to select "Syst em Menu", press "Menu/OK"
•
again.
Place the user's finger on the fingerprint scanner
•
and hold.
After the fingerprint is v erified, press "▼" to select
•
"Set/Change User Code", press "Menu/Ok".
When the screen displays "N ew Code", ent er a 6
•
digit code.
Enter the same 6 digit code again.
•
The new code is now set successfully.
•
Need help?
Do you have a question about the D Series and is the answer not in the manual?
Questions and answers