Advertisement
Basic Breakdown of Test/Configuration Navigation
**Note that all navigation is performed with the TEACH/TEST button on the sensor**
Press and hold 6 seconds
? Main Test/Configuration Menu
Tap through LED colors to select specific test/config
Press and hold 6 seconds
? Specific Test/Config Menu
Follow steps for specific test/config
LED Indicators
• Occupancy/vacancy and photo sensors have a different set of LEDs
◦ Occ/vac: red/AMBER/green
◦ Photo: red/BLUE/green
• When entering the main menu, all sensors except the OWS show the same LEDs:
◦ OWS: all LEDs flash after holding for 6 seconds, red LED blinks when you release
◦ others: green LED turns on solid, green LED blinks when you release
LED indicators on main menu level:
Occ/Vac Sensor
Red
Walk test
Amber
Range Confirmation
Blue
N/A
Green
Light Level
Red+Amber
Sensor Settings
Red+Green
LED Indication
Red+Blue
N/A
LED indicators on sensor settings submenu level:
https://support.etcconnect.com/ETC/Architectural/Aero_and_EchoFlex/Aero_and_Echoflex_Sensors/Guide_to_Test_and_Co...
(Red
Light Sensor
Commissioning Test
N/A
Range Confirmation
Light Level
N/A
N/A
EEP Select
→
Amber
or
Blue
→
Green
Updated: Fri, 17 Sep 2021 16:18:01 GMT
→
Red
→ etc.)
Powered by
2
Advertisement
