Laser Safety; Installation Tools - H3C S5800-EI Series Installation Manual

•
To prevent signal ports from getting damaged by overvoltage or overcurrent caused by lightning
strikes, route interface cables only indoors.

Laser safety

WARNING!
Do not stare into any fiber port when the switch has power. The laser light emitted from the optical
fiber might hurt your eyes.
The S5800-EI switches are Class 1 laser devices.

Installation tools

No installation tools are provided with the switch. Prepare the following tools yourself:
•
Flat-blade screwdriver
•
Phillips screwdriver
•
ESD wrist strap
3