H3C S5800-EI Series Installation Manual page 18

Figure 10 Connecting the grounding cable to the chassis
(1) Grounding cable
(3) Ring terminal
(5) Grounding hole
Connecting the grounding cable to a grounding strip
Remove the hex nut of a grounding post on the grounding strip.
1.
Cut the grounding cable to a length required for connecting to the grounding strip.
2.
Attach a ring terminal to the grounding cable:
3.
a. Use a wire stripper to strip 5 mm (0.20 in) of insulation off the end of the grounding cable.
b. Slide the heat-shrink tubing onto the cable and insert the bare metal part into the end of the
ring terminal.
c. Use a crimper to secure the metal part of the cable to the ring terminal.
d. Slide the heat-shrink tubing down the cable until the tube covers the joint.
e. Use a blow dryer to shrink the tubing around the cable.
Figure 11 Attaching a ring terminal to the grounding cable
Connect the ring terminal to the grounding post of the grounding strip, and fasten it with the
4.
removed hex nut.
(2) Grounding screw
(4) Grounding sign
11