Table of Contents
Advertisement
Attach the rear mounting brackets to the rack:
3.
a. Determine to orient the brackets with the wide flange inside or outside the rack.
b. Install cage nuts (user-supplied) in the mounting holes in the rear rack posts. Make sure the
corresponding cage nuts on the left and right rear rack posts are at the same height.
c. Attach the rear mounting brackets to the rear posts with M6 screws (user-supplied).
Do not fully fasten the M6 screws before mounting the switch in the rack.
Figure 6 Attaching the rear mounting brackets to the rack with the wide flange inside the
rack
Figure 7 Attaching the rear mounting brackets to the rack with the wide flange outside
the rack
8
Advertisement
Table of Contents
