H3C S5800-EI Series Installation Manual page 44

Figure 42 S5800-32C-EI rear panel
(1) Grounding screw
(3) Fan tray 1
(5) Fan tray 2
(7) Power module 2
The S5800-32C-EI switch comes with power module slot 1 (PWR1) empty and power module slot 2
(PWR2) installed with a filler panel. You can install one or two power modules for the switch as
required. In Figure 42, two LSVM1AC300-AC power modules are installed in the power module slots.
For more information about installing and removing a power module, see
power module."
The S5800-32C-EI switch comes with the two fan tray slots empty. You must install two fan trays of
the same model for the switch. In
tray slots. For more information about installing and removing a fan tray, see
fan tray."
The S5800-32C-EI switch comes with a filler panel in each expansion slot. You can select expansion
cards for the switch as required. In
expansion slots. For more information about installing and removing an expansion card, see
"Installing/removing an expansion
(2) Expansion card 1
(4) Expansion card 2
(6) Power module 1
Figure 42, two LSWM1FANSCE fan trays are installed in the fan
Figure 42, two LSWM2QP2P interface cards are installed in the
card."
37
"Installing/removing a
"Installing/removing a