Setting Up For Ftp Access - Edge10 EDGESTORE NAS400 User Manual

Setting up for FTP Access

Follow this procedure to set up FTP access for your folders:
1. In the Tree, click the + beside the File & Print icon.
2. Click the Protocol Control icon.
3. Click the FTP Sharing tab.
4. Click the Enable option button beside Services.
5. Type a Command Port number into the field provided.
Port 21 is typically used for the Command Port.
6. Optional. If you want to specify a range of passive data port numbers, type
those numbers into the fields provided.
The port range is 1024 to 65535.
Be sure the port numbers you enter are enabled on your firewall and server.
In active mode, the FTP server uses port 20 for the data port.
7. Optional. If your FTP client uses double-byte characters but does not
support Unicode, choose your FTP client's encoding from the Client Coding
Type dropdown menu. Choose from:
• Unicode
• Shift-JIS
• GB2312
• BIG5
8. Click the OK button to save your settings.
9. In the Tree, click the + beside the File Sharing icon.
10. Click the Modify tab.
11. From the Folder name dropdown menu, choose the folder you want to
access.
12. Check the FTP box.
13. Click the OK button to save your settings.
You can now access the specified folder from your PC using FTP.
73
Chapter 6: EASM