Connection Problems After Restart - Edge10 EDGESTORE NAS400 User Manual

EdgeStore NAS400 User Manual

Connection Problems After Restart

If your EdgeStore's network settings were set to Obtain an IP address
automatically, your DHCP server might assign a different IP address to the
EdgeStore when you restart the EdgeStore after is was shutdown for repairs.
This condition does not apply if you assigned your EdgeStore's IP address
manually.
If you experience network drive or printer connection failures, check the
EdgeStore's current IP address. See "Finding the EdgeStore's IP Address" on
page 21. If the EdgeStore's IP address has changed, your previous network
drives and printer connections will no longer work.
Here are two possible solutions:
• You may be able to reset the EdgeStore's IP address manually. See
"Changing the EdgeStore's Network Settings" on page 53 or "Making
Network Settings" on page 85.
Note that changing the EdgeStore's IP address may cause an IP address
conflict on your network. Check with your Network Administrator before
taking this action.
• If you cannot restore the previous IP address, you must create new network
drives and printer connections. See "Chapter 3: Connecting to the
EdgeStore" on page 25.
146