EdgeStore NAS400 User Manual
Checking Your Email Inbox
If you enabled Mail Alert in EASM, the EdgeStore will send you an email
message when a problem arises. Look for a message from "root."
Figure 8. Email message from the EdgeStore.
See "Adding an Email Alert Recipient" on page 93 for more information about
email alerts.
Restoring the Default Password
Normally, you change your password in EASM. See "Changing the
Administrator's Password" on page 65.
If you changed the password and then forgot the new password, you can reset
the EdgeStore to the default password: admin. Use a straightened paper clip or
the tip of a ball-point pen as a reset tool.
To reset the Administrator's password:
1.
Verify that the EdgeStore is fully booted.
2.
Insert your reset tool into the reset button hole on the back of the EdgeStore.
See Figure 9.
3.
Press and hold the reset button for eight seconds, until the System Status
LED flashes three times.
The Administrator's password is now reset to admin.
124
Need help?
Do you have a question about the EDGESTORE NAS400 and is the answer not in the manual?
Questions and answers