Edge10 EDGESTORE NAS400 User Manual page 72

EdgeStore NAS400 User Manual
11. Check the Enable box to the right of the services you plan to use.
• Windows – Enables file access from Windows PCs. Also required to
use the EdgeStore as a print server.
• Unix/Linux – Enables file access from Unix and Linux PCs
• Macintosh – Enables file access from Macintosh PCs
• FTP – Enables file access from PCs using FTP
12. Optional. Type new names into the Workgroup Name and Computer
Description fields.
13. Click the Next button to continue.
The Step 4 screen appears.
You must add at least one folder, which you will access from your PC as a
networked drive.
14. To add a folder, click the Add new folder option button.
15. Type a folder name into the field provided, check the boxes of the services
you expect to use with this folder, then click the Add button.
Add more folders as required.
16. Click the Next button to continue.
The Step 5 screen appears.
If a RAID Volume already exists on the EdgeStore, information about the
RAID Volume is shown. To change the RAID, you must delete it first, then
run the Setup Wizard again. See "Deleting a RAID Volume" on page 82.
17. From the RAID Level dropdown menu, choose the RAID level you want for
your disk array.
See for "Choosing a RAID Level" on page 106 more information.
18. Highlight disk drives in the Free Disks column and click the >> button to
move them to the Disks in RAID column.
19. Click the Next button to continue.
The Finish screen appears.
20. Click the Finish button to set up your EdgeStore.
The setup process takes several minutes, depending on the size of your disk
drives.
64