Edge10 EDGESTORE NAS400 User Manual page 22

EdgeStore NAS400 User Manual
Click the Advanced Mode option if one or more of these conditions apply:
• You do not have a DHCP server on your network.
• You have a DHCP server but no addresses are available.
• You want to set the IP address manually.
• You want maximum capacity RAID 0 Volume.
• You want to set date and time manually.
The rest of the setup instructions describe Express mode. For setup
instructions using Advanced mode, see "Appendix A: SmartWizard
Advanced Mode" on page 135.
4. Click Next >> to continue.
The Discovering Edge10 NAS screen appears. The EdgeStore is listed as a
NAS400.
5. Highlight the EdgeStore you are initiating, then click Next >> to continue.
14