Setting Up The Edgestore - Edge10 EDGESTORE NAS400 User Manual

Setting up the EdgeStore

The SmartWizard performs the setup procedures on your EdgeStore.
To set up your EdgeStore:
1. From the Windows Start menu, choose Programs, then Edge10 NAS Utility,
then SmartWizard.
The SmartWizard welcome screen appears.
2. From the Choosing a language dropdown menu, choose the language you
prefer.
3. Choose an Initiation Mode.
Click the Express Mode option if ALL of these conditions apply:
• You have a DHCP server on your network with addresses available.
• You want data protection for your RAID Volume.
• You want to use date and time settings from your PC.
The SmartWizard will overwrite all existing settings on the
EdgeStore. In most cases, you should only run the SmartWizard
one time—when you first set up your EdgeStore.
Chapter 2: Installation and Setup
Caution
13