Optional. Selecting Your Network - Edge10 EDGESTORE NAS400 User Manual

EdgeStore NAS400 User Manual

Optional. Selecting Your Network

If your PC has only one network connection, skip to "Setting up the EdgeStore"
on page 13.
If your PC has multiple network connections, you must ensure that the
EdgeStore, NAS Setup Wizard, and SmartSYNC utility are all connected to the
same network. The Configuration Tool performs that function.
To make your network selection:
1. From the Windows Start menu, choose Programs, then Edge10 NAS Utility,
and then Configuration Tool.
The Change system configuration screen appears.
2. From the Language dropdown menu, choose the language you prefer.
3. From the Scan Network Interface dropdown menu, choose the IP address
for the network where you installed the EdgeStore.
The IP addresses in this menu belong to the network interface cards (NICs)
in your PC. You must select the NIC that is connected to the network where
you installed the EdgeStore.
4. Optional. Click the ... button to navigate to the browser you want to use as
with the EdgeStore.
The default browser appears in the Browser Path field. Change this setting
only if you want use a different browser.
5. Click the OK button.
6. In the System Message, click OK to finish your network selection.
12