Using The Recover Function; Checking File System Status In Easm - Edge10 EDGESTORE NAS400 User Manual

When the EdgeStore's memory does not recognize the RAID Volume, so EASM
displays the RAID Volume as invalid. See Figure 3.
Use the Recover function to validate the RAID Volume. The Recover tab is only
active when an invalid RAID Volume is present and can be recovered.
Figure 3. An invalid RAID Volume in EASM

Using the Recover Function

To validate the RAID Volume:
1. In the Tree, click the + beside the RAID & File System icon.
2. Click the RAID Management icon.
3. Click the Recover tab.
4. On the Recover tab, click the option button beside the invalid RAID Volume.
5. Click the OK button.
The EdgeStore will reboot itself to update its configuration and recognize the
RAID Volume.

Checking File System Status in EASM

Typically the first indication of a problem with the EdgeStore's file system is when
your network drive becomes unavailable.
You might also see the message, "File system contains errors. Please check."
when you click the icons under the File & Print menu.
RAID Critical icon
Running the Recover function might erase some or all of your
EdgeStore settings. If that condition happens, run the NAS Setup
Wizard. See "Setting up the EdgeStore" on page 13.
Recover tab
is active
Important
115
Chapter 8: Troubleshooting
RAID Volume is
functional