Table of Contents
Advertisement
EdgeStore NAS400 User Manual
Enabling and Disabling the Buzzer
The EdgeStore has a buzzer that sounds when the EdgeStore is finished booting
and when a problem is detected. The buzzer is enabled by default.
Edge10 recommends that you leave the buzzer enabled.
To disable the buzzer:
1.
In the Tree, click the + beside the Management icon.
2.
Click the Buzzer icon.
3.
Click the Disable option button.
4.
Click the OK button.
Click the Enable option button, then click the OK button to enable the buzzer.
Viewing UPS Status
If you have an APC Uninterruptable Power Supply (UPS) attached to the
EdgeStore, you can check its status in EASM.
To view UPS status:
1.
In the Tree, click the + beside the Management icon.
2.
Click the APC UPS icon.
The Information tab displays the status of the UPS.
If there is no UPS connected or recognized, the Status field reports
"NO UPS."
94
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the EDGESTORE NAS400 and is the answer not in the manual?
Questions and answers