LG ARUM080LTE5 Engineering Product Data Book page 753

Multi V 5
8. Electrical Wiring
3. Setting the zoning control
Normal control
Zoning control
4. Selection of the No. of connected branches
1 branch
Connected
2 branches
Connected
3 branches
Connected
4 branches
Connected
* Each model is shipped with the switches No.2, 3, 4 pre-adjusted as above in the factory.
WARNING
If you want to use a "Model" for "No. of using branch(es)" HR Unit after closing the "Closing pipe No.", set the dip
switch for "No. of using branch(es)" HR Unit.
Ex) If you want to use a PRHR083 for 4 branches HR Unit after closing the 5~8th pipes, set the dip switch for 4
branches HR Unit.
42
SW02E setting
Master
Master
SW01E setting
SW01E
Turn the dip switch of the zoning branch on.
EX) Branch 1,2 are zoning control.
Master
SW01E
5 branches
Connected
6 branches
Connected
7 branches
Connected
8 branches
Connected
Installation of Outdoor Units