Multi V 5
4. Lifting Method
•
When carrying the suspended, unit pass the ropes under the unit and use the two suspension points each at the
front and rear.
•
Always lift the unit with ropes attached at four points so that impact is not applied to the unit.
•
Attach the ropes to the unit at an angle of 40° or less.
CAUTION
Be very careful while carrying the product.
•
Do not have only one person carry product if it is more than 20kg(441lbs).
•
PP bands are used to pack some products. Do not use them as a mean for transportation because they
aredangerous.
•
Do not touch heat exchanger fins with your bare hands. Otherwise you may get a cut in your hands.
•
Tear plastic packaging bag and scrap it so that children cannot play with it. Otherwise plastic packaging bag may
suffocate children to death.
•
When carrying in Outdoor Unit, be sure to support it at four points. Carrying in and lifting with 3-point support
may make Outdoor Unit unstable, resulting in a fall.
•
Use 2 belts of at least 8m(26.2ft) long.
•
Place extra cloth or boards in the locations where the casing comes in contact with the sling to prevent damage.
•
Hoist the unit making sure it is being lifted at its center of gravity.
8
Locking points for
transportation ropes
Forklift Carrying Hole
Forklift Carrying Guide
Installation of Outdoor Units