LifeSpan TR2000i Touch Owner's Manual page 11

Step 3: Upright Post Cover
Attachment
A. Remove pre-installed M4 x 8L
Screw(12).
B. Install the Left Upright Cover(4)
by sliding the front of the cover
around the upright and centering
or aligning the cover on the
upright.
C. Install the M4 x 8L Screw(12).
D. Repeat steps A and B for the right
upright cover.
Step 4: Handlebar Attachment
A. Place the M8 x 70L Bolt(11)
through the left handlebar and
into the uprights being careful
not to damage any wires
running through the handlebar.
Repeat for the right handlebar.
B. Loosely thread both bolts into
the upright prior to tightening.
C. Fully tighten both handlebar
attachment bolts.
Assembling Your Treadmill
4
12
M4 x 8L
(x2)
11
M8 x 70L
(x2)
5mm Allen
Wrench w/
Phillips
5mm Allen
Wrench w/
Phillips
11