Table of Contents
Advertisement
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto, (IO=3F8h; IRQ=3;), (IO=2F8h; IRQ=3;),
(IO=3E8h; IRQ=3;), and (IO=2E8h; IRQ=3;).
Serial Port Console Redirection
COM1
Console Redirection
Select Enabled to enable COM1 for Console Redirection, which will allow a client machine to
be connected to a host machine at a remote site for networking. The options are Disabled
and Enabled.
*If the feature above is set to Enabled, the following features will become available for
configuration:
Console Redirection Settings
Terminal Type
This feature allows the user to select the target terminal emulation type for Console
Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to add color
and function key support. Select ANSI to use the Extended ASCII Character Set. Select
VT-UTF8 to use UTF8 encoding to map Unicode characters into one or more bytes. The
options are VT100, VT100+, VT-UTF8, and ANSI.
Bits per second
Use this feature to set the transmission speed for a serial port used in Console Redirection.
Make sure that the same speed is used in the host computer and the client computer. A
lower transmission speed may be required for long and busy lines. The options are 9600,
19200, 38400, 57600, and 115200 (bits per second).
Data Bits
Use this feature to set the data transmission size for Console Redirection. The options are
7 (Bits) and 8 (Bits).
71
Chapter 6: UEFI BIOS
Advertisement
Table of Contents
