Supermicro SuperServer SYS-5039MC-H8TRF User Manual page 66

SuperServer SYS-5039MC-H8TRF User's Manual
Memory Scrambler
Use this feature to enable or disable memory scrambler support. The options are Dis-
abled and Enabled.
Fast Boot
Use this feature to enable or disable fast path through the memory reference code. The
options are Disabled and Enabled.
REFRESH_2X_MODE
Use this feature to select the refresh mode. The options are Disabled, 1-Enabled for
WARM or HOT, and 2-Enabled HOT only.
DMI/OPI Configuration
The following DMI information will display:
DMI X4 Gen3
DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management) state on the SA
(System Agent) side of the DMI Link. The options are Disabled, L0s, L1, and L0sL1.
DMI Extended Sync Control
Use this feature to enable or disable the DMI extended synchronization. The options are
Enabled and Disabled.
DMI De-emphasis Control
Use this feature to configure the De-emphasis control on DMI. The options are -6 dB
and -3.5 dB.
PEG Port Configuration
CPU MICRO-LP PCIE 3.0 X8
Enable Root Port
Use this feature to enable or disable the PCI Express Graphics (PEG) device in the port
specified by the user. The options are Disabled, Enabled, and Auto.
Max Link Speed
Use this feature to select the speed for the device installed in the specified port. The
options are Auto, Gen 1, Gen 2, and Gen 3.
66