Advertisement
STEP 3 : Fix the Bed Slat Support ( F ) with adjuster,Center Rail ( E ) to Bed
Slat ( D ). Attach the Assembled Bed Slat to Side Rail ( M ) Loosen and
Tighten Adjuster for the Stability of Bed. Laterly, Tighten the Bed Slat
( F ) with JCBC Screw ( 11 ).
STEP 4 : Install the Handle in front of footboard drawer.Tighten the Handle
Screw using Screw Driver.( Not Included )
NOTE : MUST TIGHTEN SCREWS PERIODCALLY.SCREW NATURALLY LOOSEN WITH USE.CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
ASSEMBLY INSTRUCTIONS
11
D
12
E
F
D
10
Push the rail meet
with wooden slat
and fix the CSK
screw ( 10 ) by
using the Screw
Driver
PAGE 3 OF 5
Advertisement
