ASSEMBLY INSTRUCTIONS Loosen the JCBB Bolt from Headboard Leg (B) and Footboard (C) using STEP 2 : STEP 1 : Attached and tighten the Headboard Leg L/R ( B ) ALLEN KEY (13).Attach the Side Rail (M) to Headboard Leg (B) and to the Headboard ( A ).Insert Spring Washer ( 2 ) Footboard (C) by pushing the bracket down to fit it.Tighten the JCBB Bolt with Flat Washer ( 3 ),use JCBC Bolt ( 1 ) to fix with...
Page 3
ASSEMBLY INSTRUCTIONS STEP 3 : Fix the Bed Slat Support ( F ) with adjuster,Center Rail ( E ) to Bed Slat ( D ). Attach the Assembled Bed Slat to Side Rail ( M ) Loosen and Tighten Adjuster for the Stability of Bed. Laterly, Tighten the Bed Slat ( F ) with JCBC Screw ( 11 ).
Page 4
ASSEMBLY INSTRUCTIONS STEP 5(a) : Place the trundle drawer front panel STEP 5 (c) : Fix the trundle drawer back panel ( I ) and trundle STEP 5 (b) : Slide in the bottom drawer panel (J) ( G ) on clean surface then Fix the trundle drawer drawer box side panel ( H ) by inserting a dowel ( 9 ) then tighten inside the groove of trundle drawer box side panel box side panel (H) by inserting a dowel ( 9 ) then...
Page 5
ASSEMBLY INSTRUCTIONS STEP 6 : Install the Handle drawer ( 5 ) in front of Trundle drawer (G).Tighten the Handle Screw (6 ) using Screw Driver.( Not Included ) STEP 7 : Push The complete assembled Trundle drawer into side rail ( M ) as per diagram shown.
Page 6
ASSEMBLY INSTRUCTIONS STYLE # : 98804 & 98805 STEP 1 : STEP 2 : Cut of the Raffia String from the back of DRESSER ( B ). Place the MIRROR FRAME (A) on the top of DRESSER (B), turn the NOMA DRESSER &...