Chapter 2 Installing The Smartswitch 9000 Module; Unpacking The Module; Installing An Hsim Or Vhsim - Cabletron Systems Expansion module 9H532-17 User Manual

17 port fast ethernet module

Hide thumbs Also See for Expansion module 9H532-17:

Table of Contents

Installing the SmartSwitch 9000

Module

Only qualiﬁed personnel should perform installation procedures.

1. Carefully remove the module from the shipping box. (Save the box and

packing materials in the event the module must be reshipped.)

2. Remove the module from the plastic bag. Observe all precautions to prevent

damage from Electrostatic Discharge (ESD).

3. Carefully examine the module, checking for damage. If any damage exists,

DO NOT install the module. Contact Cabletron Systems immediately.

You can install an HSIM or VHSIM in any Cabletron Systems device that supports

HSIMs and VHSIMs. Refer to the release notes for the version of ﬁrmware

running on the Cabletron Systems device to ensure that the HSIM or VHSIM is

supported.

To install an HSIM or VHSIM in a module that supports HSIM/VHSIM

technology:

1. Disconnect all cables from the interface module. Note the ports to which these

cables attach.

Chapter 2

2-1

Table of Contents

Need help?

Do you have a question about the Expansion module 9H532-17 and is the answer not in the manual?